| Type: | Basic Diesel Generator |
|---|---|
| Installation Method: | Fixed |
| Stroke: | Four Stroke |
| Cooling Method: | Water Cooling |
| Output Type: | AC Three Phase |
| Speed: | 1500rpm |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Δ STANDARD CONFIGURATION
1) Powered by original PERKINS water-cooled diesel engine.
2) PERKINS diesel engine with 12 months global warranty.
3) Original STAMFORD | LEROY SOMER | GENLITEC Single bearing alternator with insulation class H and IP23.
4) Standard CHINT or DELIXI circuit breaker, ABB as an optional.
5) Steel base fuel tank with anti-vibration mounting.
6) Based at leaset 8 hours build-in fuel tank ensure daily use.
7) Industrial 9 dB muffler exhaust system, free-maintenance battery, complete set of user's manual.
8) Flexible fuel lines and lube oil, water & fuel drain cocks.
9) Standard SMARTGEN HGM6120N antomatic start digital controller.
10) Standard Shrink wrap packing method (Plywood packing box as optional).
Δ TESTING ITEMS
GENLITEC POWER provides a full line of brand new and high quality products.
Each and every unit is strictly factory tested before shipment.
1) Parts faults testing
2) Fuel tank pressure testing
3) Bolt tightening torque testing
4) Painting thickness testing
5) Voltage bearing and insulation testing
6) Noise testing
7) Loading Testing: 25%, 50%, 75%, 100%, 110% load to check verify that all control systems, alarm and shut-down protection.
Δ OPTIONAL SUPPLY
1) Weatherproof canopy / Soundproof canopy / Trailer-mounted
2) Engine / Alternator Pre-heaters
3) Auto load sharing & synchronization panel
4) Build-in ATS (Auto start & stop Main Failure (AMF)
5) Large 12/24 hours fuel tank
6) Power output sockets
Δ TECHNICAL DATASHEET
| GENSET MODEL | GPP60D5|GPP60S5 |
| Prime power (50Hz) | 48KW/60KVA |
| Standby power (50Hz) | 52.8KW/66KVA |
| Frequency/Speed | 50Hz/1500rpm |
| Voltage | 220V/380V |
| Phase | Three phase, Four wires |
| Manufacturer | Genlitec (Fuzhou) Power Equipment Co., Ltd. |
| ENGINE MODEL | PERKINS 1103A-33TG2 |
| Engine speed | 1500rpm |
| Engine power (Gross) | 53.1KW |
| Number of cylinders | 3 |
| Cylinder arrangement | Vertical in-line |
| Cycle | 4-troke |
| Aspiration | Turbocharged and air charge cooled |
| Combustion system | Direct injection |
| Compression ratio | 19.25:1 |
| Bore and Stroke | 105 x 127mm |
| Displacement | 3.3 liters |
| Governor Type | Mechnical |
| Cooling system | Water cooled |
| Speed-droop | 5% |
| Starting system | DC24V |
| ALTERNATOR MODEL | Stamford UCI224E |
| Output power | 50KW/62.5KVA |
| Frequency | 50Hz |
| Number of phase | 3 |
| Power factor (Cos Phi) | 0.8 |
| Altitude | ≤1000m |
| Over speed | 2250RPM |
| Number of pole | 4 |
| Exciter type | Shunt |
| Insulation class | H |
| Voltage regulation | ±0.5% |
| Wave form: NEMA = TIF | <50 |
| Wave form: I.E.C = THF | <2% |
| Bearing | Single |
| Coupling | Direct |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}