| Warranty: | 12 Months |
|---|---|
| Type: | Self-Starting Diesel Generator |
| Installation Method: | Fixed |
| Stroke: | Four Stroke |
| Cooling Method: | Water Cooling |
| Output Type: | AC Three Phase |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Δ STANDARD CONFIGURATION
1) Powered by original Japan KUBOTA water-cooled diesel engine.
2) Kubota diesel engine with global warranty.
3) Original STAMFORD or GENLITEC Single bearing alternator with insulation class H and IP23.
4) Standard CHINT or DELIXI circuit breaker, ABB as an optional.
5) Steel base fuel tank with anti-vibration mounting.
6) Based at leaset 8 hours build-in fuel tank ensure daily use.
7) Industrial 9 dB muffler exhaust system, free-maintenance battery, complete set of user's manual.
8) Flexible fuel lines and lube oil, water & fuel drain cocks.
9) Standard SMARTGEN HGM420N antomatic start digital controller.
10) Standard Shrink wrap packing method (Plywood packing box as optional).
Δ TESTING ITEMS
GENLITEC POWER provides a full line of brand new and high quality products.
Each and every unit is strictly factory tested before shipment.
1) Parts faults testing
2) Fuel tank pressure testing
3) Bolt tightening torque testing
4) Painting thickness testing
5) Voltage bearing and insulation testing
6) Noise testing
7) Loading Testing: 25%, 50%, 75%, 100%, 110% load to check verify that all control systems, alarm and shut-down protection.
Δ OPTIONAL SUPPLY
1) Weatherproof canopy / Soundproof canopy / Trailer-mounted
2) Engine / Alternator Pre-heaters
3) Auto load sharing & synchronization panel
4) Build-in ATS (Auto start & stop Main Failure (AMF)
5) Large 12/24 hours fuel tank
6) Power output sockets
Δ SPECIFICATION
| GENSET MODEL | GPK12.5(S) |
| Prime Power | 10KW/12.5KVA |
| Standby Power | 11KW/13.8KVA |
| Engine Model | Kubota V1505-E2BG |
| Alternator Model | Genlitec S164G10 |
| Rated speed | 1500RPM |
| Standard voltage | 400/230V |
| Power factor | 0.8 |
| Phase | 3 |
| MODEL: KUBOTA V1505-E2BG | |
| Cylinder number | 4 |
| Aspiration system | Natural |
| Cooling method | Water cooled |
| Combustion system | E-TVCS |
| Bore x Stroke (mm) | 78x78.4 |
| Compression ratio | 22:01 |
| Rated speed (RPM) | 1500 |
| Displacement (L) | 1.498 |
| Rated power (KW) | 11.1 |
| Standby power (KW) | 12.5 |
| Fuel injection pump | Bosch type PFR MD pump |
| Injection Nozzle | Throttle type |
| Oil capacity (L) | 5.1 |
| Charger Alternator capacity | 12V - 30A |
| Starter motor capacity | DC 12V - 1.2A |
| MODEL: GENLITEC S164G10 | |
| Number of phase | 3 |
| Rated power (KW/KVA) | 10/12.5 |
| Frequency (Hz) | 50 |
| Power factor (Cos Phi) | 0.8 |
| Poles | 4 |
| Temp. rise | 125K |
| Terminals | 12 |
| Insulation type | H class |
| Ambient temp. | 40ºC |
| IP rating | IP23 |
| Excitation system | Self-excited |
| Bearing | Single bearing |
| Coating | Vacuum impregnation |
| Voltage regulator | A.V.R |
| Coupling | Flexible disc |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}